-
The installation of bands, connections to DomoClick® connectors to connection boxes will be carried out according to the rules of the trade.
-
Before going ahead with work on electric tracers, care will be taken to isolate them from the mains.
-
The DomoClick® connection and junction techniques are approved if used together with self-adjusting Eltrace heating tapes. Eltrace guarantees correct working only in relation with the mentions heating tapes.
-
Through the direct mounting onto the pipe, DomoClick® uses less heating tape.
-
As a general rule, DomoClick® is fixed to the pipe with the supplied ligatures. DomoClick® can also be fixed to the wall with supplied stirrups.
-
The supply cable is to bedirectly connected into the DomoClick®. Any exterior supply, junction or derivation box is thus avoided.
-
In anti-frost installations for gutters, DomoClick® must not be installed in a gutter or on the roof, but in a sheltered position under the rroof or eave
-
DomoClick® can be installed directly on pipes with a service temperature of less than 70°C. Short periods at 80°C are admitted. Important : for admitted temperatures of heating tapes, refer to the technical data
-
DomoClick® incorporated into pipe insulation. All supply points, junctions and terminals must remain accessible. Electrical supply points and terminals must be indicated with the supplied self-adhesive labels.
