Self Limiting Heat Cable - Self Limiting Cable - ELTRACE

  • Increase font size
  • Default font size
  • Decrease font size

Self Limiting Tape small section - ESR-L

E-mail Print PDF

SELF REGULATING TAPES

ESR®-L

ESR-L

Eltrace Self Regulating heating tape - small size

THE SOLUTION TO FROST PROTECTION OF YOUR WATER LINES AND LOW TEMPERATURE PRODUCT LINES

Applications:

The ELTRACE ESR-L is a self regulating heating tape designed for frost protection of pipes, gutters and storage tanks, indoors or outdoors, and also low temperature maintenance of pipes. Due to the small dimension, it is particularly suited for use with small diameter pipes.

Advantages:

ELTRACE Self regulating tapes can be cut to length on site and stored in rolls. The power output for the conductive heating element increases or decreases in response to ambient temperature changes. This self-regulating effect occurs at every point along the length of the cable thereby adjusting the power output to the varying ambient temperature condition. ELTRACE ESR-L is available in stock.

The Thermoplastic Elastomer (TPE) insulation provides excellent dielectric strength and, in combination with the overjackets, excellent moisture resistance and protection from impact and abrasion damage.
As an overjacket the Fluoropolymer offers increased chemical and abrasion resistance and good compatibility with potable water.

Technical properties:

Voltage Rating: 230 VAC 50 Hz
Minimum use temperature: -30°C

Maximum surface temperature:
De-energized :    65°C
Energized :    65°C

Power grade:

10 W/m at 10°C
15 W/m at 10°C
18 W/m at 10°C

Available Version :
ESR-L-BO: Thermoplastic Elastomer (TPE) overjacket (10,15,18 W/m)
ESR-L-BOT: Fluoropolymer overjacket (10,15,18 W/m)
Heating element: Cross linked polyolefin

Reference ESR-L-10-BO
ESR-L-10-BOT
ESR-L-15-BO
ESR-L-15-BOT
ESR-L-18-BO
ESR-L-18-BOT

Bus bar
Tinned Copper
0.56 mm² 0.56 mm² 0.56 mm²
Size with
TPE
Fluoropolymer

7.7 × 5.3
7.6 x 5.2

7.7 × 5.3
7.6 x 5.2

7.7 × 5.3
7.6 x 5.2

Minimum bending radius 35 mm 35 mm 35 mm
Minimum installation temperature -30°C -30°C -30°C
Circuit breaker size (C type) 10 A 10 A 10 A
Start-up Temperature:
+10°C
0°C
-20°C

100m
95m
77m

72m
66m
52m

60m
58m
41m